AGA SERVICING

Aga & Rayburn Servicing

What Will The Service Entail ?

​

During a routine service the following actions will normally be taken (this may vary depending on the model)

• Operation of controls & components will be checked

• Fire valves will be checked

• Fuel filters feeding the Aga oil control will be replaced and O-rings inspected

• Burners will be cleaned

• Fuel flow rates will be checked (oil) as cold oil

• Flame pattern will be checked at full combustion, high and low & adjusted if need be 

• Rope seals and gaskets will be inspected on lids and doors only, not internally

• Adjustment to the operation of insulating lids and doors

• Check oil depth within the burner

• Visually check the safety of the oil line and storage tank

• Check integrity and safety of electrical connections and insulation

• Make sure the ventilation and flue system are in accordance with regulations

• Carry out a flue spillage test and flue draught test

• Check Carbon Monoxide Alarms within the appliance room are up to date & functioning correctly

 

The insulation in the Aga can only be accessed via visual inspection. If need be, the Aga top plate can be removed and the Aga reinsulated on a mutually convenient visit .

 

Oil fuel pipes feeding the Aga from the oil tank are pressure tested and documented on a 5 yearly basis.

​

​

​

​